How to Remove Algae From Your Swimming Pool

If you have a swimming pool, you know just how difficult and expensive it can be to keep it clean. You have leaves from the trees that need to be scooped out, chemicals to add, green algae to scrape, and the occasional misfortune of dead animals. On top of all this you likely have a heater and pump that need to be checked and maintained periodically. It can all seem like more trouble than it’s worth sometimes. But during those scorching summer days, you know exactly why you put yourself through it all. If you’ve got a nasty, stubborn algae problem in your pool, here are a few pointers on how to remove algae from your swimming pool.

  1. Check your pump and filter. The first thing you’re going to need to do before you get to work is to check your pump and filter to be sure that they’re working properly. If either of them are malfunctioning, then you’re going to need to have them fixed, cleaned or replaced before you can move any further. If you do all the rest of the cleanup and don’t fix your equipment, you will soon find out that you need to start from the beginning and do it right. You can order any pool equipment that you may need from royal swimming pools and you may even be able to do all the work yourself.
  2. Test your pH level. One of the main reasons why people end up with algae is because the pH balance is off in their pool water. The pH of your pool water measures the water’s acidity. It is a scale that ranges from 0-14, with 0 being the most acidic, and 14 being the most basic. You want the pH balance in your pool to be somewhere between 7.2-7.6.
  3. Kill the algae. Keeping a healthy pH balance in your pool is important for killing germs and waterborne bacteria, but to kill the algae you are going to need some algaecide. You will want to add the algaecide in accordance with the directions on the bottle and then leave it over night. It’s important not to rush this process, so give yourself some time before your in-laws arrive to get the pool cleaned!
  4. Get scrubbing. Once you’ve let the algaecide sit over night you’re going to want to scrape it all out. Start by pulling out any scum and debris that you find in the filter and then get to the rest of the pool. You’re going to want to really get into all of the walls and tile grout. Be sure to protect your skin while you’re scrubbing and vacuuming, and make sure to really get into all the grooves.
  5. Test the water again. When you’re all done you’re going to want to test the pH level of the water to be sure that it doesn’t have to be rebalanced. If necessary, you may have to do a second algaecide treatment.

Visit to know more like this article.

Leave a Reply

Your email address will not be published. Required fields are marked *